BASIC FUNCTIONS:

• Face grinding of sawblades, milling-cutters and special diamond tools with diameters of 150 to 2200 mm.
• Side grinding of saw-blades, milling-cutters and special tools with diameters of 250 to 2200 mm.
• Relief grinding (cleaning of saw- blades and steel-blades).
• Infinitely variable drive of the blades by powerful electric motors with clamping flanges with diameters of Ø 120 mm, Ø 200 mm and Ø 395 mm.
• Blades are directly driven.
• Touch-control panel, swivel-mounted.
• Sturdy construction of the whole machine, maximum life-cycle of guides and drives.
• Optional operation by manual or fully automatic working-process.
• Dry-grinding, cold-air nozzle for cooling and cleaning during the grinding process.
• Enclosed, sound-proofed design with an illuminated working-area and large viewing windows.
• Built-in connection for an external vacuum device.
• Ergonomic accessibility for maintainance work.

SPECIAL FUNCTIONS:

• Adjustment of the angle of face grinding from -5 ° to 95 ° with a swing function up to 150 mm.
  
• Side-grinding wheels for the side dressing of saw-blades and milling-cutters up to 120 mm in width.
• Quick-clamping spindle (see options).
• Automatic adjustment of the grinding wheels in case of wearing.
  
  

• Electric connection: 3 phases + N + Pe
• Voltage: 400 V 50/60 Hz
• Protection class: IP 54
• Electrical connection power: 18 kVA
• Pneumatic connection: 6 bar
• Size L x W x H: 4,7 x 1.8 x 2.6 m 
• Total weight: 4.000 kg

• OPTIONAL FUNCTION 1: Turning unit
  With this optional device it is possible to sharpen drill bits and special diamond tools with a diameter of 0 – 200 mm and a length of max. 500 mm. In the case of specific geometry the above mentionned angular adjustment function can be used.
  
  
• OPTIONAL FUNCTION 2: Built-in bracket for supporting long tools (hollow drill)
  It is used to support long tools for maximum grinding precision.
  
  
• OPTIONAL ACCESSORY: Quick clamping spindle